INGCO 5″ Industrial Multi-Purpose Segmented Dry Diamond Blade (125mm x 22.2mm, 10mm Segment Width)
Slice deeper through extra-hard stone matrices and dense masonry slabs with unyielding speed. The INGCO DMD011252 5-Inch Diamond Disc is an industrial-tier abrasive wheel engineered for deeper material penetration and extended service life. By embedding premium industrial-grade diamond grit crystals into a high-tensile alloy steel core, this blade effortlessly grinds away stone boundaries, allowing building contractors, stone fabricators, and plumbing engineers to maintain fast tracking times with zero blade warp or structural flexing.
Aggressive Segment Geometry & Extra Deep Cuts
Extra-Wide 10mm Extended Segment Height: Features a beefed-up 10mm blade segment depth packed with a high-density diamond matrix concentration. This generous segment distribution ensures the blade retains its cutting edge sharpness up to 30% longer than standard 7mm market alternatives, providing an exceptionally lower cost-per-cut ratio.
5-Inch Extended Reach Profile: The larger 125mm outer footprint gives you a significantly deeper plunge depth compared to standard 4-inch blades, making it the perfect match for deep wall chasing lines and thick stone slab sizing.
Intelligent Heat-Dissipation Slots: The segmented rim architecture creates uniform expansion gaps along the blade radius. These slots act as aerodynamic cooling fins, rapidly extracting hot stone dust out of the cutting path while channeling continuous airflow to keep the core cool during intense dry cutting loops.
Premium High-Alloy Steel Core Plate: The base disc is stamped from premium, heat-stabilized alloy steel, tensioned precisely to withstand severe high-RPM rotational stress and eliminate blade vibration, binding, and dangerous kickbacks.
Dual-Cutting Dynamics & Universal Setup
Universal 125mm Outer x 22.2mm Inner Bore Sizing: Engineered to match standard industrial dimensions. Fits all standard 5-inch wall chasers (including your INGCO WLC15008 model) or 5-inch angle grinders perfectly without requiring custom adapter rings.
Versatile Wet & Dry Operational Flexibility:
Dry Cutting Mode: Optimized to deliver fast, hassle-free on-site cutting runs through brickwork and concrete paths without requiring water lines or pump setups.
Wet Cutting Mode: Run with continuous water cooling to achieve an incredibly glassy, mirror-smooth chip-free finish on high-end marble, vitrified tiles, and polished granite slabs while entirely suppressing fine masonry dust.
Product Specifications:
Disc Outer Footprint Diameter: 125 mm (5 Inches)
Arbor Hole Inner Bore Capacity: 22.2 mm (Standard Large Grinder/Chaser Spindle)
Active Diamond Segment Height: 10 mm
Structural Application: Stone, Concrete, Brick, Limestone, Granite, and Marble
Cutting Application Styles: Fully Certified for Both Wet and Dry Processing
Packaging Layout: Securely housed inside an eye-catching industrial factory color box.
Best Use Cases
Industrial Dual-Disc Wall Chasing: The absolute perfect matching replacement blade for commercial electrical and plumbing contractors running 5-inch wall chasers to cut clean, deep dual conduit paths into bare concrete walls and blockwork.
Granite & Marble Kitchen Slab Fabrication: Perfect for kitchen platform installers executing deep straight sizing cuts, sink hole corner cutouts, and initial step-molding grinds on extra-thick stone slabs.
Civil Concrete & Pavement Trimming: Ideal for construction crews trimming concrete curb outlines, resizing heavy interlocking walkway blocks, and score-cutting contraction lines into fresh cement pads.
Brickwork Construction & Masonry Layouts: Excellent for bricklayers rapidly sizing clay firebricks, concrete block headers, and limestone blocks to keep wall courses moving quickly.
TK Pro Tip: Because this blade features a 22.2mm inner bore, it is built to handle the immense torque of 5-inch machines. Remember that diamond discs don’t technically “cut” material like a wood saw blade; instead, the microscopic diamond grit embedded along the 10mm segment rim violently grinds away the stone matrix at high speeds! When running this blade dry in an enclosed space or inside a deep wall groove, always give the machine a brief “air-cooling break” every 30 to 45 seconds of continuous cutting. Simply pull the blade out of the cut and let it spin freely in the air at full RPM for 10 seconds. This allows the internal airflow slots to clear out packed dust and drop the core temperature instantly, preventing blade warping and extending your diamond life significantly!
The TK Tools Promise
Verified: 100% original, factory-authentic INGCO industrial masonry accessories—sourced directly and verified for genuine high-concentration diamond segment matrix grading.
Runout & Core Tension Inspected: Our warehouse technical team in Salem manually checks the blade flatness under pressure gauges to ensure absolute zero runout wobble and inspects the inner 22.2mm arbor bore tolerance before approving the color box for dispatch to guarantee stable performance.
Fast & Safe Delivery: Securely enclosed inside its industrial factory color box, wrapped in thick multi-layered protective cushioning, and shipped rapidly from our central hub straight to your project site locker or workshop counter.
Reviews
There are no reviews yet.