Jadever 7″ / 180mm Bent Head Internal Circlip Pliers (1.8mm Tip Diameter, High-Tensile Carbon Steel, 90° Angled Nose, Non-Slip Cushion Grip, PP Hanger Edition)
Stop struggling with makeshift picks, screwdrivers, or flat pliers that slip off snap rings and send delicate retaining clips flying across the shop. The Jadever JDPL9974 Bent Head Internal Circlip Pliers completely replace improvised methods with a dedicated, safe ring-handling tool. By combining a rigid carbon steel frame with a 90-degree bent nose architecture and high-precision 1.8mm tips, these pliers compress internal circlips smoothly and hold them securely during installation and removal in deep bore pockets.
90° Bent Head Architecture & Precision 1.8mm Tips
90-Degree Angled Nose Design: Engineered with a 90-degree bent head that provides direct vertical clearance into deep cylinder bores, recessed bearing cavities, and cramped gearbox housings where straight pliers cannot reach.
1.8mm Precision Formed Tips: Features ground 1.8mm tips designed to fit cleanly into standard metric internal circlip eyelets, providing a positive, slip-free grip that prevents clip flying under tension.
Internal Compression Action: Configured specifically for internal circlips—squeezing the handles together compresses the pliers’ tips inward, allowing you to shrink the ring diameter and slide it smoothly into or out of housing grooves.
Forged Carbon Steel Build & Ergonomic Grip
High-Tensile Carbon Steel Construction: Drop-forged from durable carbon steel alloy to resist arm flexing under high pressure, ensuring maximum force transfer directly to the retaining ring.
Corrosion-Resistant Surface Coating: Treated with a protective anti-rust finish that repels shop oils, grease, and moisture to ensure long service life in garage environments.
Ergonomic Non-Slip Cushion Grips: Overmolded with high-traction, oil-resistant dip-molded handles that fit comfortably in your palm, preventing hand slipping during high-tension snap ring jobs.
Product Specifications:
Overall Tool Length: 7 Inches / 180 mm
Plier Head Configuration: 90° Bent Nose (Internal Compression Profile)
Tip Diameter Size: 1.8 mm Precision Tips
Core Metallurgy Base: High-Tensile Forged Carbon Steel
Handle Grip Material: Oil-Resistant Ergonomic Non-Slip Dip Coated Grips
Primary System Applications: Internal Snap Ring & Circlip Installation/Removal, Gearbox & Transmission Overhauls, Hydraulic Cylinder Servicing, Bearing Housing Maintenance, Electric Motor Repair
Packaging Layout: Mounted neatly on an authentic, branded factory PP hanger display card.
Best Use Cases
Automotive Transmission & Gearbox Rebuilding: The daily baseline internal circlip tool for mechanics in Salem to access recessed snap rings inside wheel hubs, gearbox shafts, clutch baskets, and brake master cylinders.
Hydraulic Pump & Pneumatic Cylinder Repair: Perfect for equipment technicians to remove internal retaining rings securing end caps, oil seals, and valve assemblies inside tight hydraulic bores.
Pencil Carving Art Studio & Fine Machinery Servicing: A practical studio utility asset for pencil carving artists maintaining precision equipment. These 90-degree bent internal pliers provide a delicate, controlled method to service micro-lathe spindle bearings, optical stand pivots, and small rotary tool gearboxes that utilize internal snap rings.
General Industrial Plant Maintenance: An indispensable utility carry for plant maintenance crews to perform rapid servicing on electric motors, conveyor rollers, and water pump seals.
TK Pro Tip: Internal circlip pliers require proper tip engagement, and keeping your tips parallel to the bore face is the absolute secret to safe ring removal! Always make sure the 1.8mm tips seat completely through both eyelets of the internal circlip before applying hand pressure. Gently squeeze the handles to compress the ring until it clears its seat groove, then tilt the 90-degree nose slightly to guide the ring smoothly out of the cylinder. Never over-compress the ring beyond what is required to clear the groove—this preserves the natural spring elasticity of the retaining ring so it snaps back tight when reinstalled!
The TK Tools Promise
Verified: 100% original, factory-authentic Jadever hand tools—sourced directly and verified for genuine carbon steel metallurgy, accurate 1.8mm tip diameters, true 7″ / 180mm length parameters, and authentic 90° bent internal head configuration.
Tip Alignment & Tension Bench Check: Because retaining ring tools leave zero room for twisted tips or slipping grips, our technical team in Salem manually unboxes sample units, inspects tip alignment under optical magnification, tests internal pivot spring tension, and checks handle dip coating integrity before approving the product for final warehouse dispatch.
Fast Delivery: Packed securely inside custom shock-absorbent multi-layer cushioning and shipped rapidly from our main central hub straight to your garage counter, industrial shop, or field tool chest.
Reviews
There are no reviews yet.