INGCO 20V Cordless Tile Vibration & Leveling Machine Master Kit (60kg Heavy Suction Force, 130mm Suction Cup, 0–10,000 RPM 6-Speed Vibration, Complete Leveling & Accessories Kit, Plastic Buckle Case, 6-Month Factory Warranty)
Achieve 100% full-bed tile adhesive coverage, perfectly level lippage-free joints, and zero hollow spots under delicate ceramic and large-format porcelain slabs. The INGCO CTVLI20018 20V Cordless Tile Vibration Machine completely replaces tiring rubber mallets and fragile manual suction lifters that cause cracked tile edges and uneven mortar beds. By combining a powerful 60kg adsorption suction cup with a high-velocity 10,000 rpm percussive vibration motor, this tool lets tile setters lift, position, sink, and level heavy tiles effortlessly in seconds—backed by a 6-month official factory warranty.
60kg Adsorption Force & 130mm Heavy-Duty Suction Cup
Massive 60kg Vertical Adsorption Capacity: Built with a high-density natural rubber 130mm suction cup driven by a quick-lock suction lever. Grips tightly onto smooth, textured, polished, or glazed tiles up to 60kg, letting you lift and maneuver large-format floor and wall slabs without hand strain.
0–10,000 RPM High-Frequency Percussive Motor: Generates up to 10,000 vibrations per minute directly through the suction head. The rapid percussive action liquefies thin-set mortar beds beneath the tile, purging trapped air pockets and spreading adhesive evenly to prevent future tile cracking.
6-Speed Variable Dial Control: Features an intuitive 6-speed electronic speed adjustment thumb dial, allowing you to fine-tune vibration frequency—from low speeds for small wall tiles to maximum output for dense 120x60cm floor slabs.
Ergonomic Lightweight Build & Complete Tiling Accessory Kit
Ergonomic Single-Handed Operation: Designed with a balanced center of gravity and a soft-grip handle casing that reduces hand and wrist fatigue during continuous floor and wall installations.
Complete Professional Tiling Accessory Array: Comes equipped with essential job-site setup tools:
1 x Protective Work Kneepads: Lined with foam cushioning to shield your knees during long floor tiling shifts.
1 x 60mm Putty Trowel: For cleaning mortar joints and applying detail adhesive.
3 x Tile Spacer Sets: $1.5\text{mm}$, $2.0\text{mm}$, and $2.5\text{mm}$ sets for precise joint spacing.
3 x Tile Leveler Sets & Inserts: $1.0\text{mm}$, $1.5\text{mm}$, and $2.0\text{mm}$ tile leveler clips with tightening inserts to eliminate edge lippage.
P20S 20V Cordless Battery Ecosystem: Includes one 2.0Ah 20V Lithium-Ion Battery (FBLI20011) with LED charge indicator and a Fast Charger (FCLI2001) ($220\text{–}240\text{V} \sim 50/60\text{Hz}$) to ensure non-stop workflow.
Product Specifications:
Operational Voltage: 20V DC (INGCO P20S Cordless Platform)
Vibrational Frequency Span: 0 – 10,000 rpm (Variable 6-Speed Adjustability)
Suction Adsorption Force: 60 kg Vertical Lifting Capacity
Suction Cup Diameter: 130 mm High-Traction Rubber Pad
Included Battery & Charger: 1 x 2.0Ah Pack (FBLI20011) + 1 x Fast Charger (FCLI2001)
Included Accessories: Kneepads, Putty Trowel, Tile Spacers ($1.5/2.0/2.5\text{mm}$), Tile Levelers ($1.0/1.5/2.0\text{mm}$), Leveler Inserts
Warranty Coverage: 6 Months Official Factory Warranty
Packaging Layout: Packed neatly inside an authentic, branded plastic buckle storage case.
Best Use Cases
Large-Format Porcelain & Ceramic Tile Installation: The absolute daily baseline tool for professional tile setters in Salem to rapidly lift, place, and vibrate large floor slabs ($60\times60\text{cm}$, $120\times60\text{cm}$) flat into wet thin-set mortar beds.
Bathroom & Kitchen Wall Cladding: Perfect for wall tiling specialists to hold heavy vertical tiles securely at 60kg suction while vibrating out air gaps to prevent tiles from sliding down wall faces.
Pencil Carving Art Studio & Exhibition Display Mounting: An exceptional studio utility asset for pencil carving artists preparing stone, ceramic, or glass display pedestals. This cordless vibrator provides a smooth method to position and seat delicate mounting tiles, slate backdrops, and heavy base plates without risking hairline fractures from hammer impacts.
Commercial Building Maintenance & Renovations: An indispensable mobile power kit for facility managers and flooring crews to replace broken floor tiles cleanly without disturbing adjacent tiles.
TK Pro Tip: A cordless tile vibration machine is a high-efficiency masonry tool, and keeping the 130mm rubber suction cup clean is the absolute secret to maintaining 100% adsorption force and reliable vibration transfer! Before clamping the suction cup onto a tile, always wipe both the rubber pad and tile surface clear of dry mortar dust, sand, or water. Engage the suction lever firmly, select Speed 1 or 2 to start, and gently press the machine down onto the tile center before ramping up to higher vibration speeds. Work in a slight spiral motion from the tile center outward to push trapped air toward the open joints—this ensures full adhesive contact underneath for a textbook, crack-proof installation!
The TK Tools Promise
Verified: 100% original, factory-authentic INGCO power equipment—sourced directly and verified for genuine 60kg adsorption force, 10,000 rpm vibration motor output, complete accessory kit inclusion, and full 6-month factory warranty protection.
Suction & Vibration Bench Check: Because tile installation demands fail-safe reliability, our technical team in Salem manually unboxes every kit, tests the 60kg suction lock seal on glass panels, verifies smooth 6-speed motor acceleration, checks battery charge cycles, and confirms all spacer and leveler sets before approving the plastic case for final dispatch.
Fast Delivery: Wrapped securely inside custom shock-absorbent multi-layer cushioning and shipped rapidly from our central facility straight to your workshop counter, job site, or retail store shelf.
Reviews
There are no reviews yet.