Jadever 1/4″ Industrial Inline Pneumatic Air Filter (40µm Fiber Filter, 15cc Water Trap Bowl, High-Clarity Moisture Separator, Sliding Card Edition)
Stop moisture-ruined paint coats, clogged air blowers, and internal rust in pneumatic equipment before water and pipe scale reach your tools. The Jadever JDFF2602 Air Filter replaces basic open couplings that feed wet, dirty compressor air straight into expensive air tools. By routing incoming line pressure through a 40-micron fiber filtration membrane and into a transparent 15cc collection bowl, this unit supplies dry, particle-free air—giving mechanics, technicians, and spray operators a reliable, clean air setup.
40µm Fiber Filtration & 15cc Moisture Trap
40-Micron (40µm) High-Density Fiber Filter Element: Built with an advanced fiber matrix element that intercepts scale, pipe rust, fine dirt particles, and liquid water droplets before they reach air tools, impact mechanisms, or paint atomizers.
15cc High-Clarity Inspection Reservoir: Molded from chemical-resistant, high-transparency polycarbonate resin, allowing instant visual checks of trapped moisture levels at a glance.
Bottom Manual Drain Valve: Outfitted with a simple push-turn manual drain valve at the base of the 15cc bowl to rapidly flush out accumulated water condensation without interrupting line pressure.
Universal 1/4″ Port Fitment & Compact Inline Build
Standard 1/4″ NPT/BSP Threaded Port Fitment: Tapped with standard 1/4-inch female threaded ports for easy inline installation right after your air compressor manifold, directly before hose reels, or at individual tool drops.
Durable Die-Cast Frame Housing: The upper manifold is cast from rigid aluminum alloy to withstand everyday workshop line pressures, vibrating compressor manifolds, and rugged shop environments.
Compact, Space-Saving Footprint: Lightweight and low-profile layout, making it ideal for tight workbench setups, compact tool drops, or mounting directly onto portable compressor tanks.
Product Specifications:
Air Line Port Diameter Size: 1/4″ Threaded Connection
Filter Element Fineness Rating: 40 µm (Micron Fiber Matrix Element)
Reservoir Bowl Capacity: 15cc Water Collection Bowl
Filter Element Core Material: Premium High-Density Fiber
Set Configuration Volume: 1 Pcs / Set Standalone Air Filter Unit
Primary Applications: Automotive Spray Painting, Pneumatic Assembly Tools, Air Blow Guns, Woodworking Sanding Lines, Workshop Air Compressors
Packaging Layout: Enclosed securely inside a high-visibility factory descriptive sliding card blister pack.
Best Use Cases
Automotive Body Shops & Touch-Up Spray Painting: An essential inline safeguard in garage bays to eliminate water droplets and pipe scale from compressed air lines, preventing fisheyes, blisters, and uneven finishes in automotive paints and primers.
Pneumatic Tool Lines & Assembly Workstations: Perfect for running air-powered tools like nailers, staplers, air ratchets, and blow guns on dry, clean air to extend tool seal and rotor lifespan.
Fine Art Studios & Detail Airbrushing: A clean air supply asset for artists using micro-pneumatic airbrushes or fine detail cleaning blowers, preventing moisture spits during delicate finishing work.
General Industrial Fabrication & Maintenance: An indispensable utility unit for factory maintenance teams to protect pneumatic cylinders, solenoid valves, and automated air clamps from line debris.
TK Pro Tip: An inline air filter protects your pneumatic tools, and proper vertical mounting plus daily drainage are key to maintaining clean, dry air delivery! Always install the unit vertically with the transparent bowl facing straight down toward the floor, as gravity is required to pull separated water into the bottom of the catch bowl. At the end of every work shift, open the manual drain valve at the base of the 15cc bowl to flush out accumulated moisture so water never reaches the level of the fiber element. When threading fittings into the 1/4″ ports, apply a few wraps of PTFE thread seal tape—and hand-tighten firmly to avoid cracking the cast housing—ensuring a leak-free air seal across your shop line!
The TK Tools Promise
Verified: 100% original, factory-authentic Jadever pneumatic accessories—sourced directly and verified for true 1/4″ port threading, genuine 40µm fiber filter media, and authentic 15cc bowl specifications.
Thread Tolerance & Pressure Seal Bench Check: Because air leaks cause compressor cycle drag, our technical team in Salem manually unboxes sample units, inspects the 1/4″ internal threads, tests the O-ring seals on the transparent bowl under pressure, and checks the manual drain valve operation before approving the sliding card pack for final warehouse dispatch.
Fast Delivery: Packed securely inside custom shock-absorbent multi-layer cushioning and shipped rapidly from our main central hub straight to your garage counter, industrial shop, or field tool chest.
Reviews
There are no reviews yet.