INGCO 50x200mm High-Pressure F-Clamp (170 KGS Industrial Force, 5x15mm Heavy Iron Bar, 11mm Screw Spindle, Ergonomic Grip)
Lock your workpieces down in an unyielding, slip-free grip. The INGCO HFC020502 50x200mm F-Clamp eliminates the frustrating slip, flexing, and weak holding pressure common with low-grade bar clamps. Built explicitly to provide rigid structural support during heavy wood gluing, assembly framing, and metal drilling runs, this clamp features a thick, cold-drawn iron tracking bar and a high-lead threaded screw spindle. Simply slide the movable jaw up to your workpiece for quick-positioning, and torque the high-traction handle to apply up to 170 kilograms of continuous mechanical down-force with zero arm flexing.
Elite Structural Metallurgy & 170 KGS Compression Matrix
Continuous 170 KGS (375 lbs) Mechanical Clamping Force: The structural frame is calibrated to withstand massive interior compression loads. It forces wood glue joints perfectly flush, aligns warped furniture boards, and holds heavy metal plates tightly against drill press tables with absolute stability.
Heavy-Duty 5x15mm Corrugated Iron Ruler Bar: The primary tracking bar measures a thick 5mm in thickness and 15mm in width. Machined with deep anti-slip serration grooves along both edges, it creates an absolute mechanical lock with the moving jaw brake pads, entirely eliminating jaw slippage under maximum load.
Thick 11mm High-Lead Screw Spindle Thread: The main compression screw boasts a massive 11mm thread diameter. The deep, wide-set trapezoidal threads maximize mechanical advantage—allowing you to generate peak clamping pressure with fewer handle turns while preventing thread stripping across thousands of cycles.
Ergonomic Grip Engineering & Material Protection
Ergonomic Dual-Material High-Comfort Handle: Replaces traditional, painfully narrow wooden handles that cause blisters and hand cramping. The high-traction plastic composite grip fits perfectly inside your hand, providing a comfortable, slip-free anchor zone to apply heavy twisting torque smoothly even with sweaty or oily hands.
Non-Marring Soft Polymer Protective Swivel Pads: Both the upper fixed jaw and lower screw pad are outfitted with removable, soft protective polymer caps. This establishes a forgiving, non-marring contact boundary that prevents the heavy iron jaws from denting, scratching, or staining premium hardwoods, soft pines, or finished plastic laminates.
Vibration-Damping Heavy Swivel Joint Foot: The lower clamping foot is mounted on a flexible ball-and-socket swivel joint. This allows the pad to automatically tilt and adapt flush against angled joints, uneven bevel cuts, and round profile parts with uniform pressure distribution.
Product Specifications:
Maximum Workpiece Clamping Capacity: 200 mm ($8\text{ Inches}$)
Maximum Jaw Throat Working Depth: 50 mm ($2\text{ Inches}$)
Ultimate Certified Clamping Force Limit: 170 KGS (375 lbs Precision Hold)
Iron Rail Structural Dimensions: 5 mm Thickness x 15 mm Base Width
Drive Spindle Screw Thread Diameter: 11 mm Heavy-Duty Profile
Handle Grip Configuration: High-Traction Molded Ergonomic Plastic Comfort Grip
Workpiece Protection System: Removable Non-Marring Soft Surface Polymer Caps
Packaging Layout: Secured neatly with a branded factory descriptive paper layout card wrapper.
Best Use Cases
Fine Furniture Edge-Gluing & Panel Joinery: The absolute daily baseline tool for carpenters and cabinetmakers in Salem to clamp multi-board tabletops, lock drawer frames square, and secure edge-bandings until the wood glue fully cures.
Structural Sheet Metal Fabrication & Welding Tack Alignment: Perfect for sheet metal fabricators to clamp overlapping iron angle brackets, frame tubes, and steel plates tightly together for flawless precision tack welding.
Pencil Carving Art Studio Log & Base Staging: An exceptional layout asset for pencil carving artists to anchor raw carving wood logs, mount heavy display base molds firmly to workshop tables, and hold multi-layered acrylic display boxes rock-steady during assembly with complete surface protection.
E-Commerce Facility Packaging Table Customizations: An indispensable utility hand tool to rapidly clamp down temporary jigs, mount custom packaging roller brackets to steel tables, and assemble facility fixtures without drilling permanent holes.
TK Pro Tip: An F-clamp is a magnificent high-pressure mechanical holding tool, and maintaining strict parallel jaw alignment is the absolute secret to achieving maximum holding power while keeping your workpieces completely warp-free! When setting the clamp, always slide the movable jaw up until the screw thread sits at a strict 90-degree right angle relative to your workpiece face before tightening. If you tighten the clamp while the screw is canted or crooked, the rotational force will cause the jaw to crawl sideways, forcing your joint out of alignment and reducing your clamping pressure. To maintain a fluid, effortless handle twist across years of service, always wipe the 11mm screw threads clean of wet wood glue drips, paint oversprays, or sawdust packed in the grooves before it hardens. Drop a single drop of light machine oil onto the screw threads and the swivel foot socket joint once a month to ensure a butter-smooth turn every time you step up to your workbench!
The TK Tools Promise
Verified: 100% original, factory-authentic INGCO industrial equipment—sourced directly and verified for genuine 170 KGS mechanical force ratings and true 5x15mm iron rail parameters.
Rail Serration & Spindle Travel Bench Check: Because structural clamping gear requires complete reliability and zero flexing under load, our dedicated quality control desk in Salem manually unboxes every single F-clamp, tests the smooth sliding travel of the jaw brake plates along the 200mm iron bar, verifies the deep teeth engagement of the rail serrations, and checks the 11mm thread spindle alignment before approving the paper card pack for final warehouse dispatch to guarantee perfect, slip-free holding power on your very first clamp down.
Fast & Safe Delivery: Wrapped securely inside custom shock-absorbent multi-layer cushioning and shipped rapidly from our main central hub straight to your garage workbench, retail store counter, or industrial field office locker.
Reviews
There are no reviews yet.