3-Piece Industrial Pliers Set (HKPS08318) – 8″ Combination, 6″ Long Nose & 6″ Diagonal Cutting Multi-Tool Fleet | Induction-Hardened Anti-Rust Jaws with Two-Color Handles | INGCO

INGCO 3-Piece Professional Master Pliers Set (8″ Combination / 6″ Long Nose / 6″ Diagonal Cutting Shears Kit)

Grip slick fasteners with unyielding jaw traction, bend rigid structural wires into perfect shapes, and shear through tough copper cables cleanly with zero hand strain. The INGCO HKPS08318 3-Piece Pliers Set brings optimized mechanical leverage straight to your tool pouch. By combining three distinct jaw geometries, this kit covers every daily workshop task—ranging from heavy structural holding and twisting down to narrow, confined electrical detailing—giving garage technicians, line operators, and artisan craftsmen a balanced, durable set of hand tools that resist wear across thousands of hard work cycles.

Three Task-Optimized Profiles for Complete Workspace Utility

To maximize layout efficiency across a wide range of material thicknesses and job locations, this master kit contains three essential pliers configurations:

• 1 Pcs 8-Inch ($200\text{mm}$) Heavy-Duty Combination Pliers: The powerhouse of the set. Engineered with high-traction serrated flat jaws for gripping flat stocks, an integrated curved pipe-grip center channel for holding nuts and round rods, and a lower high-leverage wire cutter that shears easily through steel fencing wires and thick electrical cables.

• 1 Pcs 6-Inch ($150\text{mm}$) Precision Long Nose Pliers: The confined-space specialist. Features an elongated, slender needle-nose profile with finely serrated internal teeth. This profile lets you plunge straight into crowded electrical junction boxes, loop wire ends loops cleanly, and retrieve dropped washers from deep machine enclosures. Also features an integrated middle cutting edge.

• 1 Pcs 6-Inch ($150\text{mm}$) High-Leverage Diagonal Cutting Pliers: The dedicated shearing champion. Outfitted with heavy-duty induction-hardened side-cutting jaws angled perfectly for close-quarters work. It slices cleanly through copper wires, steel wires, thick cable jackets, and plastic zip-ties without leaving jagged burs or binding.

Industrial Metallurgy & Two-Color Ergonomic Grips

• Forged Structural Carbon Steel Core: Every plier frame in this set is forged under extreme thermal pressure from high-density structural tool steel. The entire jaw profile undergoes induction heat treatment to stabilize grain density, ensuring the teeth stay sharp and the cutting edges never chip or fold under heavy manual squeezing.

• Precision-Polished Faces with Anti-Rust Shield: The jaw faces are ground flat and buffed to a sleek polished finish. They are factory-infused with a specialized anti-rust oil skin that forms a barrier against damp workshop moisture, corrosive rain runoff, and greasy lubricants.

• Ergonomic Two-Color High-Friction Comfort Grips: Outfitted with custom-contoured, dual-material polymer handles. The soft-grip panels dampen friction spikes against your palm, while integrated front finger guards prevent your hand from slipping forward onto live metal surfaces during high-pressure twisting loops.

Product Specifications:

• Kit Quantity Composition: 3 Pieces / Set (Gripping, Bending & Shearing Hierarchy)

• Pliers Configurations Included: 1x 8″ Combination Pliers | 1x 6″ Long Nose Pliers | 1x 6″ Diagonal Cutters

• Core Structural Metallurgy: Drop-Forged, Heat-Treated High-Density Tool Steel

• Surface Protection Treatment: Precision-Polished Face Layer with Anti-Rust Oil Skin

• Handle Grip Architecture: Ergonomic Two-Color Dual-Material Comfort Sleeves

• Pivot Joint Configuration: Heavy-Duty Fixed Rivet Solid Pivot Alignment

• Packaging Layout: Secured neatly inside a high-visibility factory descriptive sliding card blister pack.

Best Use Cases

• Automotive Mechanical Repair & Wiring: Perfect for garage mechanics to rapidly pull fuse blocks, twist automotive copper wiring harnesses, crimp ring terminals, and hold fuel lines or small brackets steady.

• Commercial Electrical Panel & DB Board Setup: The absolute baseline kit for electrical contractors to strip heavy insulated cables, bend clean eyelet loops on solid copper wires, and snip cable ties inside distribution boards.

• Pencil Carving Art Studio Bench Layouts: An exceptional workshop companion for pencil carving artists to cleanly adjust metal armature wires, grip tiny display display pins, tighten display box hardware hinges, and safely crop tough structural mounting wires with complete hand stability.

• E-Commerce Warehouse Facility & Packing Bench Maintenance: An indispensable daily hand tool pack to maintain packing machineries, crimp steel strapping bands, pull stubborn staples from heavy shipping crates, and repair facility assets rapidly.

TK Pro Tip: Pliers are high-leverage extensions of your hands, and matching the right jaw geometry to the material is the absolute secret to keeping your tool edges factory-sharp for a lifetime! Never use your 6″ long nose or diagonal cutting pliers to cut hardened steel concrete nails, high-tensile spring wires, or master padlocks hooks, as these materials are harder than the steel cutting jaws and will leave permanent notches or dents in the blades. For cutting heavy steel wires, always use the robust rear cutting section of the 8″ combination pliers. To maintain a fluid, effortless jaw action, simply drop a single drop of light machine oil directly onto the central rivet pivot joint once every few months and work the handles back and forth to flush out trapped fine dust and grit, then wipe the excess clean with a light oil rag.

The TK Tools Promise

• Verified: 100% original, factory-authentic INGCO industrial tools—sourced directly and verified for authentic metallurgy profiles and exact dimensional boundaries.

• Jaw Alignment & Pivot Fluidity Bench Check: Because hand tool precision directly impacts your work velocity, our dedicated quality control desk in Salem manually unboxes every single 3-piece pliers set, checks the jaw tooth nesting under closing pressure, verifies that the cutting edges meet perfectly flush without gaps, and tests the pivot joints for fluid, zero-binding operation before approving the sliding card pack for warehouse dispatch.

• Fast Delivery: Wrapped securely inside custom shock-absorbent multi-layer cushioning and shipped rapidly from our main central hub in Salem straight to your workshop studio bench, retail store counter, or industrial field office locker.